BEP Splash Proof Switch Panels
Stylish contoured, moulded plastic panel with removable cover plate over the switches to conceal screws and water drain. Six gang switched circuits with high quality, two position toggle switches covered by neoprene rubber boots providing splash proof protection from the front face to IP56 standard. Features red LEDs for systems on and green LED back-lit labels. Choice of three models – Unfused for installation with separate fuses, fused with each pair of toggle switches connected to a behind panel mounted AF type blade fuse or PTC fused. Positive Temperature Coefficient (PTC) fuses are solid state 9 amp resettable fuses (turn switch off for 10 secs to reset). Supplied complete with 113702, 29 piece label set below. Additional label set 113703 is also available, below. Switches are rated to 20 amp.
| PART NUMBER | FACIA COLOUR | FUSES | OVERALL SIZE MM | CUT OUT SIZE MM | INTRUSION MM | POWER VOLT | MOUNT SCREWS MM |
| 113260 | Grey | No | 110 x 158 | 92 x 130 | 65 | 12 | 4 c/s |
| 113262 | Grey | Blade | 110 x 158 | 92 x 130 | 75 | 12 | 4 c/s |
| 113263 | White | Blade | 110 x 158 | 92 x 130 | 75 | 12 | 4 c/s |
| 113264 | Grey | PTC | 110 x 158 | 92 x 130 | 75 | 12 | 4 c/s |
Accessories
- 113471: On/off/on switch
- 113472: On/off switch
- 113491: Rubber boot
- 113473: (On)/off switch
- 115714: Fuse holder
- 113520: Dual 6mm insulated stud